The Bridge offers an easy and cost effective media conversion from fiber optic to copper in Fast Ethernet networks.

A special feature is the powering via the USB port, so an additional power supply is not required.
• Segment splitting and speed adaptation
• Robust metal housing
• Power via USB port or external power supply
• Multimode max. 2 km, Single Mode up to 125 km, optional with simplex fiber (WDM)

The Bridging Converter offers easy and cost effective media conversion from fiber optic to copper in Fast Ethernet networks. This product family is specially designed to minimize costs. A special feature is the possibility to configure the Bridge in Converter mode for applications with low latency requirements.
• Compact and cost effective design
• Robust metal housing
• Bridging (10/100) or Converter Mode (100)
• Multimode max. 2 km, Single Mode up to 125 km, optional with simplex fiber (WDM)

This Bridge provides fiber to copper media conversion whilst at the same time - via the 10/100Base-TX port, acting as a power supply for active terminal equipment such as WLAN-access points, IP-cameras or IP-phones. In addition to media conversion a speed adjustment is carried-out.
• Power-over-Ethernet according to IEEE802.3af with max. power class 15.4 Watt
• Compact desktop chassis
• Segment splitting and speed adaptation
• Auto-Negotiation 10/100Base-TX half-/full-duplex-mode manually configurable
• Multimode max. 2 km, Single Mode up to 125 km, optional simplex fiber (WDM)
• Internal power supply

The Gigabit Converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct
link enables the extension of twisted pair connections beyond the 100 m limit.
• Compact table top unit
• Media conversion 1000Base-T/1000Base-SX/LX
• Auto-negotiation half- or full duplex-mode, or alternatively manual configuration
• Multimode max. 550 m (50/125μm), Single Mode up to 100 km, optionally via simplex fiber (WDM)
• SC-connector

The Gigabit Ethernet Bridge has one RJ-45 port with 10/100/1000Base-T and one SFP slot according to 1000Base- X. The SFP slot accepts all SFPs available on the market, offering high flexibility.
• Compact desktop device
• Media conversion 1000Base-T/1000Base-X
• Speed conversion 10/100/1000 Mbps
• Half/full duplex with auto-negotiation or manually configurable
• Integrated auto crossover function to allow the use of standard patch cables

The Gigabit Ethernet Bridge has two SFP slots. One slot supports dual speed 100 Mbps (100FX) or 1000 Mbps (1000X) and the other slot GbE 1000X. The SFP slot accepts all SFPs available on the market, offering high flexibility.
• Compact Desktop Device
• Wavelength Conversion 850/1310/1550nm
• Speed conversion 100/1000 Mbps
• Integrated Link-Through functionality
• Manual configuration via DIP switch is possible

Increasing mobility also increases the importance of connecting notebooks in company-wide local networks. Using the new PCMCIA network card with fiber connection, you can integrate all the terminals directly into fiber networks (FTTD) with a PCMCIA 2.x compatible slot. Network connection is made using duplex fibers with either SC or ST connectors. The adapter is fully compatible to IEEE 802.3u (100Base-FX). We also supply drivers for all standard operating systems. The full duplex/half duplex operating mode can also be configured via software. The PCMCIA adapter is easy to install and manage.
• Compact design, dongle-less
• IEEE 802.3u, PCMCIA Rel. 2.x, JEIDA 4.x conform
• Multimode versions with SC or ST connectors
• Single Mode versions with 20/40/60km capability, SC connector
• Drivers for all standard operating systems
• LEDs display Link/Activity, Full Duplex and Collision

DVI (Digital Visual Interface) is for the digital transmission of video signals. Today DVI is already standard for video transmission between PCs and high quality TFT screens and video projectors.
• Easy transmission of DVI-D signals up to 700 m
• High resolution and picture quality
• For the connection of LCD-Displays, video projectors,
Plasma displays, etc.
• Unidirectional transmission over 4 fibers (LC-connector)
• One transmitter can source multiple receivers
• Including external power supply

PS: Power supply option EU, UK, US

The Mini Switch is developed to build up cost effective Fiber To The Office networks. Up to five end devices can be connected with standard copper cables to the fiber optic uplink.
• Compact metal housing
• Cost effective especially for small networks
• Multimode and Single Mode versions
• External power supply

The Desktop Switch allows the connection of up to five end devices via twisted pair cable. Four end devices can be supplied with PoE. The additional fiber port allows the direct connection to a fiber segment.
• Fast Ethernet Mini-Switch with integrated network management
• Power-over-Ethernet according to IEEE803.3af on four TP ports, integrated PoE controller
• Extensive configuration options with PC based management tool
• Data prioritisation (QoS) according to IEEE802.3p
• Full VLAN functionality according to IEEE802.3Q
• Cost effective especially for small networks
• Multimode and Single Mode versions

The compact Gigabit Mini Switch offers all the essential functions for setting up a modern Ethernet network. It is ideal for use in both small companies and expanding existing network structures. In addition to four twisted pair connections, the device has a modular SFP slot. The switch is available in two versions. In addition to the standard version the switch is available with integrated web management.
• Cost-effective, compact, fan less Gigabit Ethernet switch
• 4x 10/100/1000Base-T, autonegotiation, 1x SFP Uplink-Slot
• Layer 2 non blocking, 2k MAC addresses, 1MByte RAM
• Optional web management
• QoS, VLANs, STP/RSTP, 802.1x, LACP etc. (web management)

With the 8 port Gigabit Ethernet switch, MICROSENS offers an universal device for professional use in small, medium and large networks. Based on the comprehensive management functionality with Web, CLI and SNMP access, the device satisfies all demands. The Gigabit Ethernet Switch is flexible and offers the best solution for creating and expanding your networks. It has an integrated power supply unit and is fan-less. Additionally, the switch offers an unbeatable price/performance ratio.

• Compact fan-less Gigabit Ethernet switch with integrated power supply
• Integrated management with web-, SNMP,- and Telnet-interface
• 8x 10/100/1000Base-T, 2x SFP uplink-slots
• Data prioritisation according to IEEE802.3p/Q, VLAN support
• 802.1x port-based network access control (Authentication)
• STP/RSTP according to IEEE802.1d & 802.1w
• IGMP-Snooping, bandwidth management, port mirroring

This modular 24-Port Fast Ethernet Layer 2+ switch is a high performance device mainly for Fiber To The Office (FTTO) and Fiber To The Home (FTTH) applications. The switch has three modular slots on the front which can be equipped with 8 port switching modules. These modules are available with 10/100Base-TX copper interfaces or with fiber optic ports. The fiber ports can be chosen as Multimode, Single Mode or Single Mode WDM simplex interfaces.
• 24 Port Fast Ethernet plus 2x Gigabit Ethernet uplinks
• Modular slots for fiber or copper ports
• High performance 8.8 Gbps capacity
• SNMP/RMON1/Telnet/CLI/ Web management
• QoS, VLAN, IGMP, Rapid Spanning tree etc.
• Redundant Power Supply option

Conversion of existing data networks to PoE does not necessarily have to be associated with an investment in PoE switches. MICROSENS offers the possibility of simple upgrading by means of the new 24 Port-PoE-Injector. The power injector is located between the existing edge switches and patch panels on the central side, providing the power supply compliant with IEEE 802.3af (PoE).
• Up to 15.4 W per port according to IEEE802.3af
• Integrated SNMP/Telnet/Web management
• Redundant power supply and UPS available
• Compact design 19”, 1U

The use of PoE does not have to be in conjunction with an investment in PoE switches. To use existing edge switches the injectors can be plugged into the existing RJ-45 connection.
• 1x 15.4 W according to IEEE 802.3af
• Provides existing Ethernet connections with PoE
• For individual requirements
• Plug-and-Play
• Low weight and compact dimensions

The connection of non-PoE conforming end devices or old networking devices to a PoE network is done by using compact PoE-splitters. This way of providing a power supply is possible for all kinds of end devices, which typically use a separate power adapter.
• Fully compliant to IEEE 802.3af
• Plug-and-Play
• Replaces the separate power supply
• Configurable output voltage (5 / 7.5 / 9 or 12 V DC)
• Multiple connectors (2 and 2.5 mm)
• Compact dimensions

Many active network components, especially in the backbone area such as switches or routers, are equipped with slots for optical SFP transceivers. This provides reach the ultimative flexibility in terms of network configuration using SFP transceivers. Their construction allows them to be installed during operation (hot swappable). MICROSENS offers a large range of SFP s for applications such as SONET/SDH, Gigabit Ethernet and Fibre Channel. Besides multimode versions there are several Single Mode versions with various optical budgets available. Besides the standard SFPs with 850/1310 nm, MICROSENS offers special CWDM transceiver (Coarse Wavelength Division Multiplexing) to extend capacities on existing fiber links. One simple WDM version offers the bi-directional transmission over one simplex Single Mode fiber.

*optional D = Diagnostics